anti-corrosion, lubricating and penetrating compound
designed for the marine industry. Recommended for use on
electrical and electronic equipment.
Dwindling maintenance budgets, coupled with closer
scrutiny of operating costs are commonplace.
Equipment down-time, repair and replacement are
Regularly-scheduled, preventive maintenance is always
less expensive than the repair or replacement of
With regular use, Corrosion Block will
significantly reduce your overhead expenses.
Corrosion Block Different?
is the marine version of ACF-50. It is a state-of-the-art,
anti-corrosion compound specially formulated to perform in
the extremes of the marine environment. Corrosion Block has
five superior features:
1. It is a
superior anti-corrosion compound.
2. It kills corrosion in progress.
3. It prevents new corrosion cells from forming for 24
4. It is an excellent penetrant.
5. It is an excellent light lubricant.
can be described as a clean, clear, ultra-thin fluid which
leaves a non-greasy atmospheric barrier to protect the base
metal on interior surfaces. Corrosion Block leaves no gummy
residue because it contains no wax, resin, tar, asphalt,
silicone or teflon. It can be sprayed, or wiped on with a
damp rag. Corrosion Block will actively penetrate the
corrosion on the surface of the metal, and, in the process,
isolate it electrically from the base metal. Once the
Corrosion Block has penetrated into the corrosion cell, it
displaces and/or emulsifies and encapsulates any moisture
present in the cell and bringing it to the surface where it
evaporates. Corrosion Block then fills the cell, with a 40
KV dielectric barrier to prevent further moisture contact
with the base metal for up to 24 months.
Corrosion Block is easy. Simply spray it on the area to be
protected until it appears to be shiny. You don't need to
saturate the entire surface as you do with some other
products. Corrosion Block has a strong capillary action and
will spread into the smallest crevices, leaving an
Block's ability to remove moisture, combined with its
excellent penetrating and strong dielectric properties, have
brought a number of electronics "back from the dead" with
just one application. The Corrosion Block removes the
moisture from the corrosion byproduct, then isolates the
corrosion by-product from the electrical circuit. Corrosion
Block can be used in many different electrical and
electronic applications without fear of damage. And it won't
harm any plastics or painted surfaces and is actually good
for rubber, keeping it from cracking and drying out.
you apply Corrosion Block during your regularly scheduled
maintenance and monitor the length of protection your
equipment receives. Exactly how long Corrosion Block's
protection will last depends on a number of factors. Because
Corrosion Block forms such an ultra-thin film, surfaces
which are subjected to frequent rubbing or washing will have
a relatively short re-application cycle. However, on
protected internal surfaces, one application of Corrosion
Block will provide protection for 24 months before the
active ingredients are consumed.
Corrosion Block is virtually non-toxic and cleans up easily
from hands, clothes and painted surfaces with soap and
What is corrosion?
1. THE CORROSION
PROCESS: When moisture is present for prolonged periods
of time, corrosion "cells" are formed. These cells act as
miniature batteries, feeding the transfer of electrons as
long as any oxygen-providing moisture is present.
2. WAXES RETAIN WATER:
Most corrosion inhibitors contain sealants such as wax,
tar, asphalt, Teflon or silicone that lay on top of the
corrosion cell. Because of their thick composition, they
cannot remove the electrolyte and may actually seal it in,
thereby encouraging corrosion.
Corrosion Block Work?
3. CORROSION BLOCK IS APPLIED:
Corrosion Block can be applied by spraying, fogging or
simply wiping it on with a shop rag.
4. CORROSION BLOCK PENETRATES THE
CORROSION BYPRODUCT: Corrosion Block's ultra-thin
formula easily pentrates the entire corrosion cell.
5. CORROSION BLOCK EJECTS THE
ELECTROLYTE: The encapsulated and emulsified electrolyte
is ejected from the corrosion cell and replaced with
6. NO ELECTROLYTE-NO CORROSION:
Corrosion Block acts as an insulator, terminating the
electrolytic process for 24 months!
Some Corrosion Block Applications
Thermostats, pressure gauges, heat
sensors, micro-electronics, switch gears, relays, electrical
manifold systems, junction boxes, fuse panels, switches,
contactors, connectors and pins, motor operated valves,
screw terminals, terminal strips, gear train switches,
electric motors, windings, solenoids, starters, discharge
fans, fan motors, bearings, UPS circuit boards and terminal
connections, power modules, cellular phone circuit boards
and antennas, telephone switching equipment, circuit
breakers, tank batteries, alternators, generators,
electrical enclosures, analyzer housings, start-stop
buttons, base radios, remote radios, intercom systems,
speakers, central control panels, video monitors, security
systems, communication towers, radars, railings, stanchions,
copper and aluminum tubing, automatic fire fighting system
valves and nozzles, automatic fire sprinkler system heads,
valve housing cover bolts, winches, gear boxes, sheaves,
pulley cables, blocks, capstans, cross slides and turrets,
micrometers and height gauges, mechanized screens, pliers,
wrenches, saw blades, drills, vise threads and guides,
battery terminals and cases, drill and lathe chucks, turret
bearings, air brake actuator, cables and linkages, clarifier
arms, spindles and motor bearings, centrifugal and rotary
pump diaphragms, sleeves, shafts, seals, impellers, valves,
valve stems, diaphragm springs, intake and exhaust valves,
all metal moving parts, engine mounts, levers control arms
and linkages, shock absorbers, exhaust manifold studs and
nuts, brake adjustment screws, automatic choke, carburetor
linkages and butterfly, battery cables and terminals,
ignition harness, distributor cap, idler pulleys, fans and
blowers, bearings in service and shelved, elevator cables,
doors, door locks, metallic coupling cards, windows, locks,
sliding doors, hinges, crank windows, track assembly bolts,
overhead door counter weight springs, window guides,
plumbing fixtures, stop cocks, outdoor fixtures, electric
signs, air conditioning coils, Freon check valves, sweated
fittings, clocks, light bulb sockets, bilge pumps, fishing
rod reel seat and roller guides, reels, rusty nuts and
bolts, bridge and hand-held radios, running lights, depth
sounders and fish finders, horn, fuse panels, circuit
breakers, firearms, spark plugs, moisture damaged
electronics, tuna towers, trailer lights and springs,
bicycles, roller blades, skate boards, RC models, etc.
For any further
information please feel free to contact us